Absorbents

Aqui-Pak™ Absorbent Pouches

Aqui-Pak™ was designed for the safe transport of laboratory specimen tubes by keeping the tubes separate and providing cushioning at the same time. It consists of a multi-layered polymeric material that has extremely high absorption properties. To use, simply place the tubes in the provided bays and insert the Aqui-Pak™ into secondary packaging. During shipment, Aqui-Pak™ is best used in combination with a specimen bag or canister to comply with DOT and IATA shipping regulations.

• Ideal for Biological Substance Category B or Exempt Animal / Human Specimen packaging
• Excellent absorbent capacity
• Aqui-Pak™ pouches can be customized to individual specifications

Aqui-Pad™ Benchtop Absorbent Mat

Aqui-Pad™ is specifically designed for use on the laboratory benchtop to absorb spills or drops of aqueous liquid during routine lab work. Aqui-Pad™ consists of two material layers with absorbent media sealed inside. The top layer is a non-woven polypropylene pad and the bottom layer is impervious polypropylene film to enclose any liquid spills so the liquid does not reach the benchtop. Inside the two layers is a proprietary absorbent media fabricated from tissue paper and wood pulp materials that are impregnated with a super absorbent polymer. Aqui-Pad™ is supplied in flat sheets 18" x 11" (457mm x 280mm) and will absorb up to 750 mL. Place in biohazard disposal after use.

Absorbent Sheets

Absorbent Sheets are the most cost-effective absorbent product that complies with the regulations governing specimen transport. These tissue-based papers are impregnated with super-absorbent polymers to absorb liquids that may escape during transport. Sheets can be purchased in a variety of stock sizes or custom cuts to meet your specific requirements.

View Absorbent Sheet Performance Test

Absorbent Wadding for Cushioning Material

• ½" thick absorbent packaging material
• 100-foot roll perforated every 12 inches
• Excellent filler and cushioning material for biological specimen transport
• Protects fragile specimen shipments

Green Z™ Fluid Control Pouch

Porous, non-woven material (similar to a teabag) allows liquid and the solidifier to mix. No pouring necessary. Recommended for the bottom of sharps containers, red bags, or for specimen shipping.